1000w Slim Under Seat Subwoofers with Amp,Car Subwoofer amp with Ambient Light,3.2″ Height Amplified Subs High/Low Level Input for Car/Truck Audio,Powered Subwoofer and Amp Package Wire Kit Deep Bass

Product description

Car Audio Subwoofers Drives Excellent Sound Quality

The amplifier is built in, so installation and wiring is clean and simple. We added high level inputs so you can install this with an aftermarket or factory system.The smart turn-on circuit will sense that an audio signal is present and turn on the amplifier.

The all in one solution to give you great sounding bass in your vehicle without taking up a lot of space. This sub enclosure is only 3.2″ thick so that it can easily fit under your seat or car trunk.

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

A dynamic blue LED ambient halo has been added around the speakers. The LEDs also light up when the car is started.

Mount screws allow you to mount the subwoofer in any position, including under seat, the back of the seat, or the trunk of the car .

Aluminum Cone, an aluminium alloy that ensures stable performance, high strength, corrosion resistance, strong heat dissipation.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

The amplifired subwoofer has great controls so you can adjust the sound to your liking. It has a low pass crossover filter, bass boost, phase control, and input sensitivity.

If the head units without original output,High to low level converter is need for wiring connection.

1 RCA Cable Connection Way

2 Converter Connection Way

Product Parameters

Peak Power 1000 Watts RMS Power 220 Watts Low Pass Filter 50Hz – 150Hz Frequency Response 20Hz – 150Hz Bass Boost Bass Boost: 0 – 12dB @ 20Hz Signal to Noise Ratio >90dB Impedance 4 Ohm Total Harmonic Distortion < 0.4% Input sensitivity, Low level 300mV Input sensitivity, High level 1.0V Sensitivity 90dB @ 1w / 1m Dimensions (Inches) 13.6″ L X 10.2″ W X 3″ H

【Deep Power Bass】The upgraded car subwoofer amp combo has a peak power increased from 800W to 1000W which delivers ultra-low frequencies for cinematic explosions, and concert-level music.Pulse Width Modulated ,PWM simplifies power supplies. It controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. Efficiency. Increased reliability.This upgrade power can bring you stereo souround bass, taking you a deep bass enjoyment.
【Built-In Subwoofer Amplifier】Features high-level and RCA inputs, adjustable input sensitivity and auto turn-on functionality.The smart turn-on circuit will sense that an audio signal is present and turn on the amplifier. When you turn off your music signal the amplifier built into this subwoofer system will automatically turn itself off. High Level Inputs will be used to connect to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs. Low Level Inputs also known as RCA inputs , used to link with the source unit. The sub and amp combo can adjust the Low Pass Filter,Bass Boost,Gain Input and Volume control to customize your music.
【Ultra-Thin Shell, Space Saving Design】The Powered subwoofer’s dimensions are 13.58L*10.23W*3.2H inches, ultra-thin Underseat car subwoofer with amp, designed to save space, the thickness of core is 3.2 inch that can fit perfectly under your seat or fit for most back seat floor and trunk. The slim compact car subwoofer delivers dynamic, punchy low frequencies even in compact spaces – maintaining valuable space saving in your vehicle and also enhancing your car audio system at the same time.
【Excellent Heat Dissipation】Aluminum Cone, the slim underseat active powered subwoofer car audio is made of cast aluminium, an aluminium alloy that ensures stable performance, high strength, corrosion resistance, strong heat dissipation and long life, as well as excellent heat dissipation and reliable performance,ensuring the amplified truck subwoofer stays cool even when placed under the seat or trunk.
[Car Subwoofer Parameter]–The Amplified Subwoofer Peak Power: 1000 Watts, RMS Power Handling: 220 Watts, Frequency Response 20Hz – 500Hz, Low Pass Filter: 50Hz – 150Hz, Bass Boost: 0 – 12dB @ 20Hz, Built-in Sub-Acoustic Filter Load @ 20Hz, Total Harmonic Distortion (THD): < 0.4%, Rated Fuse: 15A, SNR Signal to Noise Ratio: >90dB, Input sensitivity high level 0.9V, Low-Level Input: 300mV Normal. impedance: 4 Ohms. Green power/red protection LED.The car truck subwoofer includes wired bass volume remote control. With gain, bass boost and crossover controls.
[Advanced Overload Protection] Overload protection circuit,automatically detects and prevents excessive power from reaching the speaker,reducing the risk of overheating or speaker failure for long-lasting performance,includes remote bass knob, subsonic filter, phase switch, and thermal/short/overload protection.
[Easy installation for Most Vehicles]–The under seat subwoofer with amp dimensions are ultra thin enough to fit in the car under seat or settle in the trunk. We did to make installation quick and easy is we put all the inputs and outputs on one side. This makes wiring neater and easier. The screws are also included in the package to better prevent bumps which can fit more types of vehicle such as SUV/UTV/RV/Truck/Van,etc.
[Customer Service Supports] We promise to replace the product with a new one if there is any quality issue within 1 year. We provide professional after-sales support to solve your problems.