10G PoE++ Injector, 1G/2.5G/5G/10Gbps, 802.3af/at/bt, Delivers 15.4W/30W/60W PoE Ethernet Power, Up to 100 M (328 ft), for Ultra-High-Speed and High-Power Devices

Product description

ThePoEstore 10G PoE++ Injector: The 10G PoE++ injector supplies a PoE device with PoE (15.4W)802.3af, PoE+ (30W) 802.3at, or PoE++ (60W)802.3bt power.

Installation Flexibility: Wall-mounted and desktop design: High-quality, heat-resistant and oxidation-resistant white plastic shell accommodates most installations scenarios.

10G Speeds: Equipped with a 10GBASE-T RJ-45 port providing network speeds of up to 10Gbps over existing Cat6a or better cabling.

Product Overview

ThePoEstore 10G PoE++ Injector, model PoE-M921-10GW, combines electrical power with a 10GBASE-Tnetwork connection to produce a 10G PoE++ network signal. Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE, PoE+ and PoE++ devices. Connect the 10G PoE++ injector to a non-PoE switch, and then run an Ethernet cable with data + power to network a PoE, PoE+ or PoE++ device up to 100 meters (328 ft.) over Cat6A or better cabling. Network PoE devices such as wireless access points, IPcameras, IPTV decoders, VoIPphone systems, access controls, and more.

Product Specifications

Origin China Brand ThePoEstore Model PoE-M921-10GW Number of ports 1 CH, Data IN PoE Out Data Rate 10/100/1000Mbps/2.5G/5G/10G Base-T Power Input AC100~240V 50/60HZ – PoE Output Output Power Voltage 48 – 54V PoE Output Power 60W MAX / Support IEEE 802.3af/at/bt Pin Assignment 1/2(-)3/6(+), 4/5(+)7/8(-) Operating Temperature 0℃to 40℃ Operating Humidity Max.80%, non-condensing Storage Temperature -10℃ to 50℃ Storage Humidity Max.90%, non-condensing Protection Over current protection / Over load protection Protection Over voltage protection / Anti-interference protection Product Size 138×63×33.5mm

What is the output voltage and power of this PoE injector? My device is 48V 55W. Is it compatible?

Yes, this PoE++ injector has a standard output voltage of 48V and 60W and complies with IEEE 802.3af/at/bt, the standard handshake protocol.

Can I use a PoE injector with my PoE wifi router?

Yes, it can work for all PoE devices below 60W.

I noticed the indicator light on the product. Is it the same color when it’s receiving power and data?

The PoE indicator light is green when it’s receiving power and blue when it’s receiving data.

Will this power the unifi u6 lite wifi access point, which requires the newer Search term:u-poe-af, an active 48vdc

Yes. The u in that model number is just their part number for what they want to sell you. This adapter is Poe-af and poe-at. Or poe+. I have enterprise watchguard waps that also require this much power and they work great.

Convert Non-PoE to PoE Instantly – Upgrade your existing non-PoE switch or device with this 48V/60W White PoE++ injector, enabling PoE without costly replacements
IEEE 802.3af/at/bt Compliant – Delivers power and data over a single Ethernet cable, perfect for powering devices in areas without electrical outlets
10Gbps High-Speed PoE++ Injector – Supports 10/100/1000Mbps, 2.5/5/10Gbps speeds with advanced protection against overvoltage, overcurrent, and short circuits
Extend Up To 100m (328 ft) – Transmit power and data over Cat5e/Cat6 cables to remote devices like IP cameras or access points effortlessly
Plug-and-Play Setup – Easy setup with no software installation or configuration needed and power high-demand devices like IP cameras or APs in large areas.Ideal for Ultra-High-Speed & High-Power Devices

Product summary

shift
+
opt
+
D