Boat LED Strip Lights, 2 x 6.56FT 12V RGBIC IP68 Waterproof Marine Lights, Chasing Flow Underglow Kit with 3.3FT Pre-Wired Leads for Pontoon Kayak Golf Cart Deck Gunnel

Product description

1 Unique Original Design

2 GUNWALE

3 RV Awning Lights

4 Golf Cart Lights

1 What in the box?

2 Certified Quality

3 1 Year Support

4 Specification

ONE SEAMLESS SILICONE BODY – THE END OF LEAKY “WATERPROOF” STRIPS: Ordinary marine LED strip lights are tape LEDs slid into an extruded plastic tube with glued end caps – and those seams are exactly where water gets in. This boat LED strip light is custom-molded as ONE seamless silicone piece, end to end, IP68 rated and UV-stabilized, so spray, rain, mud, car washes and hose-downs stay out and the sleeve stays clear instead of yellowing. Inside, addressable IC chips drive smooth chasing flow effects a plain single-color boat light strip can’t produce.
FROM YACHT DECKS TO GOLF CART UNDERGLOW – Accent gunnel rails, cockpit, cabin and deck edge with a smooth chasing glow, or clip the strips under your golf cart body and along the roof for parade-ready underglow. Blue and green stay easy on night vision for night fishing runs. The same kit mounts clean on ATVs, UTVs, trucks, pontoons, kayaks, RV awnings and pool fences – speed, brightness and modes all adjust from the included remote.
288 LEDs, DOT-FREE FLOW, FULL INSTALL KIT: Each 6.56ft strip packs 144 LEDs (288 total) at 24 pixels per meter for even, dot-free flowing light. In the box: 2 strips (13.1ft total), potted IC controller, IR remote, 8 stainless steel clips with screws, and a full 3.3ft (1m) of pre-soldered, color-coded 22AWG leads per strip – red to positive, black to negative – long enough to reach your battery terminals or fuse block without splicing a single wire in the dark.
BUILT FOR 12V RIDE & BOAT OWNERS – READ THIS BEFORE YOU ORDER: These 12V LED strip lights are made for boats, kayaks, pontoons and 12V systems. Golf carts running 36V or 48V (Club Car, EZGO, Yamaha) need a step-down voltage reducer (NOT included) – there is no 110V plug in this kit and never will be. Mount the potted controller above the splash line; the strips are IP68 submersible-grade, the remote is not waterproof.
NO ADHESIVE-ONLY MOUNTING, NO APP, NO PAIRING – HONEST HARDWARE: Adhesive tape alone is not a mounting strategy at full throttle, so we ship 8 stainless clips with screws that hold both strips mechanically. The remote is simple IR – point it at the controller box (not the strip), aim and click, no WiFi, no app, no pairing dance. Questions on wiring length, mounting or voltage? Message us through Amazon – real answers from the people who built the kit.

Product summary

shift
+
opt
+
D