



Product description


Break Your Subwoofer In
Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to.
This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure.
The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.
800 Watts Peak Power, PWM MOSFET Power Supply RCA & Speaker Level Inputs Low Pass Filter, Bass Boost Phase Control, Remote Subwoofer Control LED Status Indicator Thermal / Short and Overload Protection Circuits High Performance Voice Coil Rubber Surround

Built-In Amplifier
Systems with a built-in amplifier do not require the addition of an external amp. They already have the power to play louder.

High and Low Level Inputs
High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

MOSFET Power Supply
Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Class A/B Amplifier
Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

Variable Low Pass Filter
Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Variable Bass Boost
Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Variable Gain Control
The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Low Profile
Low-profile subwoofers are a great choice for space-constrained areas without compromising on power and performance.
Space Saver – If you are tight on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options
Pulse Width Modulated – PWM simplifies power supplies. It controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. Efficiency. Increased reliability
Variable Low-Pass Filter – A low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
High Level Inputs – Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BASS8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
Low Level Inputs – Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BASS8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
Variable Bass Boost – Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
Phase Control – Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up “out of phase”
Specs – Dimensions: 12.20″ x 8.86″ x 2.95″, Weight: 8.82 lbs. LED status indicator. Thermal, Short and Overload Protection Circuits. High Performance Voice Coil. Rubber Surround. Aluminum Cone, Remote Subwoofer Control
Warranty – BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality