Car Amplifiers – Gravity Audio WZ3000.1D Warzone 3000W Max Class D Amplifiers 1 Ohm, Stable at 2 Ohm and 4 Ohm Stable with Remote Sub Control 6.4 pounds

Product description

Command Serious Bass

A Class D monoblock amplifier built for dedicated subwoofer systems

Warzone Gravity WZ3000 1D brings up to 3000W maximum power to compatible vehicle subwoofer installations. This single channel car amplifier combines Class D operation, stable 1, 2, and 4 ohm capability, adjustable bass tuning, and a bold brushed black aluminum chassis. Build a focused bass amp solution for a custom car sound system upgrade, from a single compatible subwoofer to wiring configurations designed around multiple compatible subs.

Dial In the Low End

The visible control panel puts essential subwoofer amplifier adjustments in one place. Set the variable low pass filter from 40Hz to 180Hz to blend bass output with the rest of a car stereo system. Adjust the subsonic filter from OFF to 50Hz for the enclosure and subwoofer setup, then use 0 to +12dB bass boost when additional low end impact suits the music and installation. RCA inputs and the remote connection support a tailored car audio amplifier setup.

Ready for System Wiring

A dedicated terminal end gives installers a clear connection area for the vehicle electrical system and compatible subwoofer wiring. The WZ3000 1D is stable at 1, 2, and 4 ohms, allowing the monoblock amplifier to be matched with compatible single or multiple subwoofer configurations. Its MOSFET power supply is designed for 11 to 15V DC vehicle electrical systems, supporting a purposeful bass focused car audio build.

Built for Bass Focused Builds

A dedicated subwoofer amplifier gives a car sound system upgrade the focused power and adjustment range needed for low frequency reproduction. The Warzone Gravity WZ3000 1D is a single channel Class D amp designed specifically for subwoofer duty, delivering up to 3000W maximum power for compatible vehicle audio systems. Stable 1, 2, and 4 ohm operation helps installers select compatible wiring configurations based on the subwoofers and enclosure in the build.

Signal and tuning controls help tailor the bass amp to the rest of the system. A 300mV to 6V input sensitivity range and 22K ohm input impedance accommodate a broad range of compatible car audio source signals. The low pass filter, adjustable from 40Hz to 180Hz, lets the amplifier concentrate on the frequencies intended for subwoofer playback. Pair it with the OFF to 50Hz subsonic filter and 0 to +12dB bass boost to refine response for the selected enclosure, music style, and listening preference.

For shoppers comparing a car amplifier, car audio amplifier, car stereo amp, monoblock amplifier, or RMS power requirements, this model provides clearly defined maximum power, impedance stability, and signal specifications for system planning. Its 8Hz to 180Hz frequency response at minus 3dB, 80dB signal to noise ratio, and less than 0.1% total harmonic distortion support clean, bass centered playback. The MOSFET power supply is engineered for 11 to 15V DC vehicle electrical systems.

The Warzone Gravity WZ3000 1D is a Class D monoblock amplifier created for dedicated vehicle subwoofer systems. With up to 3000W maximum power in a single channel format, this car amplifier is suited to listeners building impactful low frequency output into a custom car sound system upgrade. Stable 1, 2, and 4 ohm operation gives installers flexibility to match the bass amp with compatible subwoofer wiring configurations, whether planning around a single compatible driver or multiple compatible subwoofers.

Fine tune the subwoofer amplifier around the enclosure and the rest of the car audio system. The variable low pass filter adjusts from 40Hz to 180Hz, helping define the upper range of bass playback. An adjustable subsonic filter spans OFF to 50Hz, while 0 to +12dB bass boost provides another way to shape low end impact. The included wired level remote places bass level adjustment within reach from the driver seat, making it easy to adapt output to different recordings and listening preferences.

This car audio amplifier accepts compatible source signals through a 300mV to 6V input sensitivity range and 22K ohm input impedance. It is rated for an 8Hz to 180Hz frequency response at minus 3dB, an 80dB signal to noise ratio, and less than 0.1% total harmonic distortion. These details help shoppers compare a car stereo amp, Class D amp, and monoblock amplifier for a bass centered installation, including projects where RMS power requirements are being considered alongside system wiring and subwoofer compatibility.

A MOSFET power supply is designed for 11 to 15V DC vehicle electrical systems. The brushed black aluminum chassis, silver mesh grilles, and visible connection layout deliver a distinctive installation ready appearance for a custom vehicle audio build. Choose the WZ3000 1D when the goal is a purpose built subwoofer amplifier with adjustable low pass filter control, bass boost, impedance flexibility, and a dedicated wired level remote.

Technical Specifications

Amplifier type Class D monoblock Channels Single channel Maximum power Up to 3000W Stable impedance operation 1, 2, and 4 ohms Low pass filter Variable, 40Hz to 180Hz Subsonic filter Adjustable, OFF to 50Hz Bass boost Adjustable, 0 to +12dB Input sensitivity 300mV to 6V Input impedance 22K ohms Frequency response 8Hz to 180Hz at minus 3dB Signal to noise ratio 80dB Total harmonic distortion Less than 0.1%

3000W Max Class D @ 1 Ohm, Stable at 2 Ohm and 4 Ohm with Bass Knob Included
S/N Ratio > 70 dB with Frequency Response at 8 Hz ~ 180 Hz and THD < 0.2%
Bass Boost Level 0 ~ 12 dB with LPF 40 Hz ~ 180 Hz and Subsonic Filter 0 ~ 50 Hz
High and Low Level Inputs, Variable Low Pass Crossover, Variable Bass Boost
Dimension ( L×W×H ): 223.5mm (8.8 in) × 211mm (8.3 in) × 64.5 mm (2.5 in)

Product summary

shift
+
opt
+
D