Centralite Centralite Indoor Entry Sensor w/ Rechargeable Battery | Smart Home Door Window Sensor | Zigbee 3.0 Compatible | Wireless Security Alarm | Ezlo Hub Compatible | Requires a ZigBee Hub

Add your review

$24.95

Brand:

$24.95

Add to wishlistAdded to wishlistRemoved from wishlist 0

Centralite Centralite Indoor Entry Sensor w/ Rechargeable Battery | Smart Home Door Window Sensor | Zigbee 3.0 Compatible | Wireless Security Alarm | Ezlo Hub Compatible | Requires a ZigBee Hub41UTUIKaaoL. AC SL100051+oBvZ8VQL. AC SL100061JYCneU5dL. AC SL1000517dw6m6XCL. AC SL100061 F aMvGpL. AC SL100051F7D574LUL. AC SL1024

Product description

Every door and window, open or closed, in one list. 11

The Centralite Indoor Entry Sensor reports the moment a door or window opens or closes. This is the rechargeable version – a 3.7V cell that charges over Micro-USB instead of a coin cell you replace.

2A2A Open and closed, reported

A magnet on the frame and a sensor on the panel. Your hub sees the state change the instant it happens.

2b2b Rechargeable, not disposable

A 3.7V 500 mAh cell charges over Micro-USB. No battery drawer, no shopping for the right size.

2c2c Half an inch, aligned

Stick the sensor to the frame and the magnet to the panel, no more than half an inch apart, aligned to the mark.

2d2d Zigbee 3.0

Pairs to an Ezlo hub through the MiOS app, and to most other Zigbee hubs on the market.

Check what you own before you buy

This sensor needs a Zigbee hub

The Centralite Indoor Entry Sensor is a Zigbee 3.0 device. It has to be paired to a Zigbee-compatible smart home hub, which means a hub has to be running in the home before this does anything at all – an Ezlo hub, or most other Zigbee hubs on the market. Pairing to an Ezlo hub is done in the MiOS app on iOS or Android. Pairing to a third-party Zigbee hub follows that hub’s own inclusion steps, so check its manual first. With an Ezlo hub, automations run locally and survive an internet outage.

33

4a4a Where it goes

Sensor on the door or window frame, magnet on the panel, within half an inch and lined up with the alignment mark. Adhesive on both, no tools.

4b4b What your hub does with it

Open MiOS, add a device to your active hub, search the model number, then hold the reset button for five seconds until the indicator blinks. The hub has a 60-second window to find it, and a Retry button if it does not.

5.2 5.1 5.3 5.4 5.5
1 Entry sensor

2 Motion Sensor

3 Entry Sensor

4 Water Leak Sensor

5 Temperature and Humidity

66 Seven days a week US-based care, 6AM to 10PM CST

Need help with your Centralite device? Ezlo’s US-based customer care team is here to help. Visit our official website to find the latest ways to get in touch, or check the included user manual for product support and troubleshooting information.

Do I need a hub for this sensor?

Yes. This is a Zigbee 3.0 device and has to be paired to a Zigbee-compatible smart home hub – an Ezlo hub, or most other Zigbee hubs.

How is this different from the CLZ-3372?

Same job, different power. This one has a 3.7V rechargeable cell and a Micro-USB port; the CLZ-3372 runs on a replaceable CR2032.

How far apart can the magnet sit?

No more than half an inch from the sensor, and lined up with the alignment mark on the case.

How do I pair it?

In MiOS, add a device to your active hub, search CLZ-3371, then hold the reset button five seconds until the LED blinks red rapidly.

Does it need screws?

No. Adhesive film on the back of both the sensor and the magnet. Peel and press onto a clean, dry frame.

Reliable Entry Detection: Get instant notifications and know immediately if a door or window is opened or closed, enhancing your home’s security.
Rechargeable Battery Powered: Enjoy the convenience and flexibility of a built-in rechargeable battery, allowing for easy, wire-free installation anywhere you need it.
Seamless Smart Home Integration: Fully ZigBee 3.0 certified, this sensor offers unparalleled compatibility with most ZigBee-compatible smart home hubs, including Ezlo hubs.
Empower Smart Home Automation: Go beyond simple alerts. Use the sensor to trigger customized smart home routines, such as turning on lights when a door opens or adjusting your thermostat for energy efficiency.
Effortless Setup & Placement: Installation is quick and simple. Just pull the battery tab or hold the reset/pairing button, then follow your smart home app’s instructions. Its compact design allows for discreet placement on any door or window.
Versatile Indoor Monitoring: Ideal for a wide range of indoor locations including living rooms, nurseries, bedrooms, garages, and sheds – wherever you need to monitor entry points.
Requires a ZigBee Hub

Centralite Centralite Indoor Entry Sensor w/ Rechargeable Battery | Smart Home Door Window Sensor | Zigbee 3.0 Compatible | Wireless Security Alarm | Ezlo Hub Compatible | Requires a ZigBee Hub
Centralite Centralite Indoor Entry Sensor w/ Rechargeable Battery | Smart Home Door Window Sensor | Zigbee 3.0 Compatible | Wireless Security Alarm | Ezlo Hub Compatible | Requires a ZigBee Hub

$24.95

Thinkstacker
Logo
Shopping cart