







Product description

QODOSEN DX-286 Portable Shortwave Radios Introduction
1.DX-286 ( the performance is the same as QODOSEN SR-286 with more user-friendly operation) adopts NXP’s high-performance automotive chip TEF6686 to ensure superior selectivity and ultra-high sensitivity.Better reception experience for you!
2.FM band support 64-108MHz, support RDS/RBDS Radio Data System, 5 kinds of frequency range selectable,6 kinds of step selectablesuitable for diferent areas to receive;there are 17 kinds of bandwidth selection, with excellent selectivity.
3.S/N Ratio ≥ 60dB, clear signal, low noise, built-in adjustable antenna attenuator, improve the overload resistance;LW/MW/SW band with built-in low-noise amplifier switch to improve the reception sensitivity.
4.All bands support external antennas, using an external antenna can make the DX-286’s sensitivity even better.
5.LW and Mw bands support switching between telescopic antenna and internal ferrite bar antenna. In an outdoor setting with minimal interference, reception is even better with a telescopic antenna or external antenna.

QODOSEN Portable Shortwave Radio with High-Capacity Rechargeable 3350mAh Battery Power Supply / Independent Amplifier Design
1. The DX-286 utilises an 18650 button-type rechargeable battery. (note: This product contains one 3350mAh rechargeable battery.) rather than flat batteries, making them very easy to replace. When the battery is dead, it can also be charged using a standard 5V USB charger. (Avoid using a fast charger as it may cause damage).
2. The DX-286 uses separate amplifiers for speakers and headphones to reduce interference and enhance sound quality,with greater dynamics, wider range and less distortion.

External antenna interface, QODOSEN Portable Shortwave Radios supports all bands including LW/MW
1. Improved signal reception quality: By connecting an external antenna, the radio’s sensitivity to receiving radio waves is enhanced, thus improving the quality of signal reception and allowing the radio to pick up more channels and clearer audio.
2. Expanded reception range: An external antenna can help broaden the radio’s reception range, especially in areas with weak signals or limited signal coverage, allowing for a wider range of reception.
3. Reduced interference: Indoor environments often contain various sources of interference, such as electrical devices and metal structures, which can affect the radio’s reception. Connecting an external antenna allows the antenna to be placed in a location with better signal reception, reducing the impact of such interference.
4. Convenient adjustment of antenna position: External antennas typically come with longer cables, allowing users to conveniently place the antenna in different positions to achieve the best signal reception. Users can optimize reception by adjusting the antenna’s position and direction.

Portable Shortwave Radios by High Performance Automotive Chips
DX-286 radio adopts TEF6686 car radio chip,this car radio DSP tuner offer outstanding performance levels with the broad range of features and advanced algorithms(CEQ, EMS, lMS, and PACS,Noise Blanker..), software-defined radio signal processing,Especially in multipath improvement, adjacent frequency interference, weak signal processing, and noise elimination, it has significant advantages.

QODOSEN portable shortwave radios always have a method of operation that suits you!
DX-286 has 5 tuning modes, 100 editable pages, supports 1000 cross band storage stations, two storage sorting (ATS JUMP/ATS COVER), multiple search thresholds, multiple store/delete methods. Flexible operation.

ANTENNA SWITCHING
LW/MW has three antenna switching modes. Choose the right antenna for the environment to get the best reception.
1. In the case of indoor or electromagnetic environment with high interference, it is recommended to use Internal ferrite bar antenna to receive (ANT INT).
2. If you are outdoors or in an electromagnetic environment with little interference, you can try to use Retractable Antenna to receive (ANT EXT), Retractable Antenna can bring you a better reception experience.
3. To achieve better reception, you can use external antenna in ‘ANT EXT’ mode.

ANTENNA ATTENUATOR
1. Enhance Reception Clarity: An attenuator controls signal strength, preventing overloading and distortion, ensuring clearer and more stable broadcasts.
2. Mitigate Interference: It minimizes interference from strong electromagnetic sources like storms or power lines, improving reception performance.
3. Improves Selectivity: In multi-frequency environments, it helps filter out unwanted signals, enhancing the receiver’s focus on the desired broadcast frequency for accurate and clear reception.

Built-In Low Noise Amplifier Switch
1. When reception is weak, you can enable the signal amplifier (AMP ON) to increase the strength of the signal, making it clearer.
2 If there is a signal overload when receiving a strong signal, you can turn off the signal amplifier (AMP OFF) to reduce overload.
3. When using an external passive antenna, it is recommended to turn on the antenna amplifier (AMP ON).
4. When using an external active antenna, it is recommended to turn off the antenna amplifier (AMP OFF).

FEATUERS OF FM BAND
The DX-286 radio has an FM tuning range of 64 MHz to 108 MHz with 5 adjustable ranges to meet the range requirements of different countries. It enables precise tuning with 6 selectable steps and 17 bandwidth options, ensuring excellent selectivity in all environments. It also supports the RBDS/RDS data system for an enhanced broadcast experience,, and four different FM signal processing functions to improve signal quality.

MUSIC VOICE TONE
The DX-286 is equipped with a closed-cavity full-range speaker in its compact size, which excels in vocal and music details; and has a tone switching function, which allows you to adjust the details and layering of audio by selecting different gears (MUSIC/VOICE) to satisfy the listening experience of different users.

ONE-KEY MUTE FUNCTION /SWTICH LCD ON/OFF
1.The One-Key mute quickly toggles mute on or off without adjusting volume gradually.
2.Turning off the display can reduce noise interference and improve weak signal reception for a better auditory experience.
【Features】Adopt NXP TEF6686 vehicle chip, SNR ≥ 60dB, with ultra-high sensitivity and selectivity, in dealing with multipath and neighbouring channel interference and noise processing advantages, support for external antennas, built-in attenuator, low-noise amplifier, LW/MW with telescopic/ferrite rod antenna switching function, FM signal processing ..suitable for broadcasting enthusiasts for long-distance reception!
【Multi-function】Clock, World Time, Two Alarm Modes, Sleep Timer, FM/LW/MW/SW, Multiple Tuning Modes, SNR/RSSI Display, Direct Frequency Input, 1000 Cross-Band Memories, 100 Editable Memory Pages, Squelch Level, FM Signal Processing Level, Tone Switching, Meter Band, One-Key Mute, LCD ON/OFF, Backlighting, etc. …. More functions are waiting for you to experience!
【Portable Design】Dimensions: 5.27 inches (W) × 2.99 inches (H) × 1.18 inches (D). Powered by a top-button 18650 battery (non-flat top, included). Compact and lightweight for on-the-go entertainment or study; the perfect travel companion.
【Portable full-band AM FM shortwave radio LW】Available with DSP radio chip TEF6686 to increase reception sensitivity, with excellent selectivity and ultrafast sensitivity. Easily receive stations by rotating the antenna 360° . FM:64-108 MHz,AM 520-1710kHz, SW 1711-27000 kHz,LW 144-519kHz.
【Accessories】 1 x DX-286 Radio, 1 x Rechargeable Batteries (included, batteries not sold separately), 1 x Dedicated Fleece Bag, 1 x USB Charging Cable, 1 x Carrying Case, 1 x DX-286 User’s Manual.
$84.89