Related Products
Trak-4 12v Hardwired GPS Tracker....
Humminbird 411660-1 Helix 5 Chirp...
Product description
Product Features:
-Suitable for all cars, tractors, vans, vessels, boats, yachts, etc.
-The signal comes directly from the satellite signal receiver (GPS Speed Sensor)
-The gauge has the advantages of high precision, quick location confirmation and short start up time.
-IP67 waterproof and dustproof grade
-Stepper motors used for full range of stepping gauges, great feature with its less power consumption, longer life, higher precision, etc.
-With curved glass (with anti-fogging function)
-With ultra-wide working voltage design( long-term operating voltage: 9-32V, Maximum up to: 36V (≤ 1 min)).
How to adjust backlight?
– Power on the power supply first.
– Press the back SET button or Multi-function button (less than 2 seconds) to change the back light color.
– Color in sequence: Red(Default)->Green->Blue->White->Yellow->Kelly->Orange->Purple->Auto Mode.
– When users select the AUTO MODE, the back light will be off for around two seconds, and switch automatically as above sequence per minute.
How to install it?
– Cut an 85mm (3 3/8″) hole in the panel and allow a clearance of 70mm (2 3/4″) behind the panel to fit the gauge.
– Put the gauge in the hole and screw down.
– For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable.
GPS Speedometer keeps counting?
– After installation in the first time, GPS speedometer needs to search for signal, that’s the reason that LCD counts numbers all the time.
– After getting signal, LCD will come back to 0. It is normal.
How to switch “TRIP01” “TRIP02” “COG”?
– Press the back “MODE” button for 3 seconds to switch “TRIP01”, “TRIP02” or “COG”.
– “TRIP01″(Default): mileage will be automatically cleared after power off, the data will not be saved.
– “TRIP02”: mileage will not be automatically cleared after power off. Users need press the back “SET” button for 3-5 seconds to clear.
Technical Data
Fixing dimension 85mm(3-3/8″) Indicating Range 0-35MPH 0-55km/h Working Voltage 12V/24V Tripmeter 0-999.9 miles Odometer 0-999999 miles (not adjustable) COG (Course Over Ground) 0-359 Backlight Red Green Blue White Yellow Kelly Orange Purple or automatic Operation mode LCD display, stepper motor Protection grade IP67
Why does “TRIP” display E01, E02, E03?
– Turn on supply power after installation.
– Then the meter starts to search for signal and “TRIP” will count automatically.
– If there is still no signal, “COG” “TRIP” will be flickering.
– If “TRIP” displays E01. It means that there is not any GPS signal.
– If “TRIP” displays E02. It means that this speedometer started working well but suddenly lost signal in the middle. (If the signal is lost in the middle of 30 seconds, keep the speed before the signal is lost; if there is no signal after 30 seconds, the speed will be reset to zero)
– If “TRIP” displays E03. It means that this speedometer cannot receive any data from GPS antenna within 10 seconds. (If the signal is lost in the middle of 10 seconds, keep the speed before the signal is lost; if there is no signal after 10 seconds, the speed will be reset to zero)
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
5.0 out of 5 stars 3
4.1 out of 5 stars 87
5.0 out of 5 stars 4
4.4 out of 5 stars 85
4.4 out of 5 stars 382
4.2 out of 5 stars 340
Price
— no data
$60.99$60.99
— no data
$59.99$59.99 $59.99$59.99 $50.99$50.99
size
85mm 52mm 85mm 85mm 85mm 85mm
color
white+stainless steel black+stainless steel black+black white+stainless steel black+stainless steel black+black
Indicating Range
0-35MPH 0-55km/h 0~999 (MPH, Knots, Km/h adjustable 0-60km/h 0-40MPH 0-35MPH 0-60km/h 0~999 (MPH, Knots, Km/h adjustable 0~999 (MPH, Knots, Km/h adjustable
adjustable odometer
no yes no no no yes
Type
GPS speedometer GPS speedometer GPS speedometer GPS speedometer GPS speedometer GPS speedometer
Package Includes:
1x GPS speedometer
1x GPS Speed Sensor
1x Multi-plug socket
1x Installation Instruction
Cut an 85mm (3 3/8″) hole in the panel and allow a clearance of 70mm (2 3/4″) behind the panel to fit the gauge. Put the gauge in the hole and screw down.
For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable
It shows Current Speed, TRIP/COG(choose one), ODO(cannot be reset). If you need other color faceplate, pls. search for ASIN B07DY4YSJ7 and B07DXV46B5
Backlight: Red Green Blue White Yellow Orange Purple Light Green or automatic
9-32VDC(12VDC/24VDC) Working Voltage, 100% Waterproof and anti-fogging protection
$59.99