Plug in Temperature Controlled Outlet for Heater, Freezer 1200W 10A | Timer & Smart Memory Thermostat Temp Controller -40~212℉, IP67 Waterproof Probe for Incubator, Homebrew, Reptile, Greenhouse

Product description

PLUG IN THERMOSTAT 1200W WITH TIMER

Work intermittently

Set START=12:00, STOP=12:00.

It will work for 12h, then stop for 12h, then cycle again.

Work at a specified time

Set START=00:30.

Set START=00:30. the countdown for 30 min, the system will automatically start and keep working.

Stop at specified time

Set STOP=00:40

Set STOP=00:40, the system will automatically start working for 40 min and stop.

ON&OFF at specified time

Set START=00:30 & STOP=00:40.

It will countdown for 30min, and start working for 40 min, and stop.

1 P01 CYCLE TIME

2 P02 COUNT DOWN ON

3 P03 COUNT DOWN OFF

4 P04 COUNT DOWN ON&OFF

Set START & STOP Temperature

Heating : START < STOP (eg. 50°F – 80°F)

Cooling : START > STOP (eg. 70°F – 40°F)

High & Low Temp Alarm

Customize high and low temperature alarm values for any temperature control. Buzzer can be silenced.

1 Heating/Cooling

2 Temperature Alarm

CHILD LOCK

In non-setting state, press and hold the ⋀ and ⋁ buttons simultaneously for 3 seconds to turn the child lock on or off.

REFRIGERATION DELAY

Refrigeration Delay Time: 0~10 minutes.

The default setting is 00:00.

TEMPERATURE CALIBRATION

Temperature Calibration Range: -9.9℉~9.9℉(-4.9℃~4.9℃)

The default setting is 0.0℃/0.0℉.

IP67 WATERPROOF

Length: 6.5FT;

IP67 waterproof probe

【TEMPERATURE CALIBRATION】Temperature control range: -40℉~212℉（-40℃~100℃）. Use the calibration function to fine-tune offsets (±8.8°F range). Whether you need to keep a reptile tank at 85℉ or prevent greenhouse from dropping below 68°F, temperature controlled outlet delivers consistent results
【LCD BACKLIT DISPLAY】Crystal Clear Readings in Pitch Darkness. When checking your incubator at 3 AM or adjusting your greenhouse heater before sunrise, you can read the temperature instantly – no flashlight needed. Plug in thermostat is widely applicable to reptile, incubator, terrarium, refrigerator, heater, home brewing, fermentation
【HEATING & COOLING MODES】One temperature controller, Year-Round Control. Switch between heating (for winter greenhouses) and cooling (for summer reptile tanks) with a single button. When Start Temper＞Stop Temper, it enters cooling mode; when Start Temper＜Stop Temper, it enters heating mode
【IP67 WATERPROOF PROBE】The 6.6ft waterproof sensor goes into soil, aquariums, or fermentation buckets without damage. All settings of the temperature controlled outlet will be automatically saved after a power outage. Cycle Mode for seed mats, Countdown ON/OFF for energy savings. Timer range: 0~99 hours and 59 mins
【CHILD LOCK】Child locks on thermostat outlet prevent curious children from arbitrarily changing the settings of reptile terrariums or incubators. Temperature controlled outlet supports temperature mode, cycle time mode, and countdown mode;Output: Max 10A/120V 1200W and the buzzer can be muted

Product summary

shift
+
opt
+
D