SP108E RGB LED Controller, Smart APP WiFi Control, DC5-24V

Product description

Taoellen SP108E RGB LED Controller, Smart APP WiFi Control, DC5-24V

Both IOS version and Android OS version are available. Requires IOS version 10.0 or later OR Android OS version 4.4 or later.

WS2811 WS2812B WS2813 WS2801 SK6812 SM16703 TM1814 GS8206 TM1914 P943S GS8208 TM1804 TM1913 P9411 UCS1903

SK9822 P9813 P9414 LPD6803 INK1003 P9413 LPD8806 DMX512

TX1812 P9412 SK6812-RGBW APA102 APA105 TX1813

It can support WS2812B and WS2813. But there is no options on setting page.Please choose Ws2811 if connect it to Ws2812B and W2813. It can’t support 5050 ordinary RGB LED srtips with no lCs.

Only in AP mode. The blue light will light up, and the controller itself will have a WiFi signal. The green light is in STA mode and can be controlled through the WiFi you are connected to

Hold the AP/STA button in the lower left corner until the green light flashes.

Choose the light strip model and the correct line sequence for your . Connect and also set the pixels you want to control.

Choose after successful connection the controller of the 2. Generation and the automatic adjustment (select manually. if the agreement is not valid).

After downloading the application and opening it, directly connect to the WLAN of SP108E in your phone’s WLAN. Open the application, click on Add Device, connect to the Wi Fi you are using, and then bind the controller.

WHY NOT WORKING? It’s very important to know the difference of the 2 modes AP Mode & STA Mode.

AP(Access Point) mode: controller and phone connect directly ,controller working as an access point.

Connect steps:1. When the device is not connected to any WIFI network, power on the controller and wait for 20s

and the controller will switch into AP mode;

2.In the WIFI setting page, find and connect the controller(named like SP108E_xxx,the default pin code is12345678);

3.Open the LED Shop App, then the controller will be showed on the device list.

STA(Station)mode: Contrller and phone are in one same WIFI network,in this network.users can operate the controller smoothly

Connect steps:1.When the device is not connected to any WIFI network, power on the controller, controller will remain in Wait-For-Connect mode for 20 seconds;

2.Make sure that your phone is connected to WIFI network, Open LED Shop APP, pressing the Add Device button, input the WIFI pin code, the press the OK to confirm and wait for the configure processing finish;

3.When controller successfully enter the WIFI network, it will be showed on the device list;

4.User can select the controller and remove it out of the network by pressing the Remove Device button, then the controller will switch into AP mode.

Stable WiFi APP Control: This professional LED WiFi Controller supports long distance mobile APP control for IOS 10.0 and Android 4.4 above systems, only compatible with 2.4G WiFi network and rejects 5G WiFi signal, equipped with AP direct connection mode and STA LAN routing mode to meet different connection demands for this practical wifi led light controller
Ultra Wide Chip Compatibility: This premium led light strip controller perfectly adapts to mainstream single wire and dual wire LED driver IC chips including WS2812B WS2811 SK6812 RGBW WS2801 APA102 DMX512, cannot drive non IC ordinary 5050 RGB RGBW light strips, ideal universal rgb led controller for addressable pixel lamps
Reliable Wide Voltage Safe Operation: The versatile SP108E LED Light Strip Controller runs stably under DC5V DC12V DC24V wide voltage input, supports reverse connection protection and hot swap protection, can load maximum 2048 pixels and save custom settings after power off, match matched power supply voltage with your LED strip strictly
Diverse Lighting Effects And Image Color Capture: This smart led controller owns 180 multicolor dynamic modes and 8 single color static modes such as breathing wave flash flow, adjustable brightness speed and hue, unique image color extraction function synchronizes light atmosphere with indoor decorative surroundings easily
Practical Humanized Functional Design: Configure pixel quantity and segmented grouping freely via mobile APP, two wiring terminals compact structure fits multiple installation scenes for home ambient decoration, gaming room atmosphere lighting renovation perfectly

Product summary

shift
+
opt
+
D