Related Products
GHome Smart Plug Mini, WiFi Smart...
Smart Home Energy Monitor Supports...
WiFi Smart Energy Monitor Switch...
Kasa Smart Plug, Matter Compatible,...
Product description
Omnimeter Pulse v.4
Universal single phase and three phase electric Submeter with ability to count pulses on three separate inputs
The Omnimeter Pulse v.4 is our most advanced universal smart meter to date, now with the ability to count pulses from up to 3 pulse-output devices, and control 2 external relays. This is truly the one meter to meet all of your metering needs!
The Omnimeter Pulse is also a revenue-grade universal kWh meter. It can meter systems ranging from single-phase 120V 2-wire or single phase 120/240V 3-wire, 120V to 480 volts, or 3-phase 3-wire 120 to 415 volts or 3-phase 4-wire 120 to 480V, 50/60Hz , 50/60 Hz. It Supports CTs from 100A to 5000A. Accurate to 0.5% (Class 0.5)
This Omnimeter can also count the pulses from up to 3 different pulse output devices. These could be pulses from our Pulse Output Water and Gas Meters or from any other un-powered dry contact pulse output device.
It also comes with 2 controllable relay outputs. These can be controlled via RS-485, either locally or over the internet from anywhere in the world using the Push3 gateway. You can set the outputs to be high or low to drive an external relay. The Relay Control Outputs can continuously provide up to 50 mA at 12 volts DC each. Control the EKM-Switch120 directly, or control lights, motors, entire buildings, implement Demand Response, Load Shedding, etc. via relay control. The Relay Control Outputs can also be set to go ON or OFF from 1 to 9999 seconds. The real-time state of the outputs can also be polled via RS485. The outputs can also be used to power an external device (Wireless 485Bee Module, sensors, etc). Relays can be controlled online when reading the meter with the EKM Push3 data system, or locally when reading the meter with a USB Converter.
This meter has been accuracy tested and certified for by the State of California Department of Weights and Measures. It is California Type Approved and meets California standards for revenue grade metering. Many other states accept California Type Approval for their metering requirements.
This meter uses our full range of compact Current Transformers (it cannot meter electricity with out at least one). The CT ratio can be set internally to work with up to 5000 amp CTs (no multiplier needed).
These meters are supported by our revolutionary EKM Push3 system. This is our cloud-based, plug-and-play, meter data solution. We are really excited about this new system, and recommend it for most remote reading applications that use our Omnimeter models. Push3 users can also take advantage of Encompass.io, which is our free online dashboard and meter management suite.
Description: Universal, Pulse Counting, Relay Controlling, Smart MeterFeatures: Pulse Counting and Relay ControlsVoltage: 120 volts, 120/240 volts, 120/208 volts, 230 volts, 277 volts, 480 voltsAmperage: Up to 5000 ampsType: External CT, 50 or 60 HzSystem: Single-Phase, 3-Ph. 3-Wire, or 3-Ph. 4-wireData: Smart Meter v.4 RS-485 CommunicationsModel: EKM-Omnimeter Pulse v.4
Single-Phase 2-Wire
Use 1x CT for 120 volt single phase North American, or 230 volt 2-wire electrical systems
Single-Phase 3-Wire
Use 2x CTs for 120/240 volt single phase systems
3-Phase 3-wire
Use 2x CTs for 3-phase 3-wire systems (no neutral) up to 415 volts
3-Phase 4-wire
Use 3x CTs for 3-phase 4-wire systems up to 277/480 volts
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.4 out of 5 stars 64
4.2 out of 5 stars 23
3.4 out of 5 stars 4
5.0 out of 5 stars 8
—
Price
$149.43$149.43 $219.00$219.00 $276.00$276.00 $320.00$320.00
— no data
Single Phase
✓
✓
✓
✓
✓
Three Phase
no data
✓
✓
✓
✓
120V–240 2-Wire
✓
✓
✓
✓
✓
120/240V 3-Wire
✓
✓
✓
✓
✓
3-Phase 3-Wire Up To 415V
no data
✓
no data
✓
no data
3-Phase 4-Wire (with neutral) Up To 480V
no data
✓
no data
✓
no data
Remote Readable
no data
✓
✓
✓
✓
External Current Transformers
no data
✓
✓
✓
✓
3x Pulse Inputs (connect to water and gas meters)
no data
no data
no data
✓
✓
UL Listed (up to 240v)
no data
no data
✓
no data
✓
EKM Push3 Gateway (sold separately)
Cloud-based Data System
Access your Omnimeter data online with our free EKM Push data service and software options.
Two-Way Communication
Offers the ability to make meter settings and control devices (with our v.4 Omnimeters).
Infinitely Scalable
You can have an unlimited number of Push3 gateways, reading meters around the world, and access all of their data online with your unique secure key.
Benefits: Free cloud data storage On-board data storage Plug and play Read up to 128x Omnimeters Supported by free software options Open APIs Ethernet and WiFi capable Once/minute meter reads
Dashboard, Reporting, and Billing
Once the EKM Push3 gateway sends the data to the cloud it is available in your free online Encompass account. The data can be visualized on customizable dashboards, presented in PDF or CSV reports, or formatted into PDF or CSV bills which can be sent on to your tenants.
Works with any electrical system up to 480V
Can Count pulses from up to 3 pulse-output devices
Can control up to 2 external relays
Returns over 40 pieces of data per meter read
Can also act as 3 separate 120V meters in 1