






Product description

Intelligent sensor for doors and windows
Real-time detection of the opening state of doors and windows. The Zecamin door and window sensor will let you know when you are not at home. If unauthorised entry via your door or window, the magnetic sensor sends a notification via the app, contributing to the safety of your home and family.
Note: The door sensor only works with 2.4G WiFi, not with 5G. Make sure there is 2.4G WiFi before purchasing.
Note: Due to the transmission of the WiFi signal, there is a delay of 2-5 seconds.
How to connect Wi-Fi?
It is strongly recommended to read here before connecting to a Wi-Fi router. Before connecting to the wireless router, please check the following points.
1. Please make sure your WiFi works in 2.4G mode. If your WiFi supports 2.4G and 5G double band, please disable the 5G WiFi first. The door sensor only detects 2.4G WiFi. After the door sensor has already connected to the Wi-Fi router, you can activate 5G WiFi for your router. The door sensor stays connected to the 2.4G WiFi all the time.
2. Please make sure your WiFi router does not block the MAC address of the device.
3. Please make sure the WiFi signal is strong. It is recommended to place the door sensor and your phone less than 2 meters away from the Wi-Fi router while connecting the device to the Wi-Fi router.
How to add the sensor:
1. Download the Smartlife app or Tuya app.
2. Log in to the app and press “+” in the upper right corner to add a sensor. No hub is required.
3. When you turn on Bluetooth, adding to the app will be easier.
4. Make sure the surface of doors and windows is smooth and clean.
5. The installation distance should not exceed 0.7 inches.
6. These two parts must be aligned by their alignment notch.

diy security system
Want to know if someone is stepping into your garage at midnight? The Zecamin contact sensor will help you. When someone opens the door or window, the sensor informs you and protects your home safety.
Specifications:
CHECK YOUR DOOR OR WINDOW: See the current state “open/closed”
It can be used to automatically control other smart devices
100% privacy: No cloud, no registration, no tracking

Create intelligent scenes
Connect the door sensor to your smart devices (bulb, air conditioner, etc.) to automatically turn it on and off when you open/close your door. Make your life smarter.

It can monitor the condition of a door or window, which is helpful to keep an eye on the elderly who live alone.

To better take care of your children. Prevent them from going outside without accompaniment.

The door window sensor can be used to monitor your pets. For example, dogs and cats. You will be informed when they go outside without your permission.
【Smart Home Security Sensor】This door sensor alarm is an excellent security addition to any contact structure: front door, window, baby room, garage doors, skylights, safes, etc. Watching the security barrier at the top of the stairs. All the statuses of doors and windows will be displayed simultaneously in the app. No hub required. 8 AAA Batteries Included.
【Programmable Smart Sensor】 Extend your smart home automation with ORIKLON WiFi door sensor door sensor; Set up your smart routines in app; Automatically turn on your smart wall switches or lights when door opened; Automatically turn off your air-condition when window opened; More smart devices can be sync as long as they compatible with Smart Life app.
【Alert Message Notification】 The smart door and window sensor is compatible with Smart Life App and Tuya Smart App. You will receive an alarm signal from your phone App when the door sensor find your door or window opened. No more need to afraid someone enter your home without permission.
【APP Remote Monitor & Voice Control】Under 2.4G WiFi, The wifi door sensor can be controlled by SMART LIFE App or TUYA App which can be downloaded by scanning the QR code on the user manual. By connecting the smart sensor with Alexa or Google assistant to realized voice control. Come to make your smart home life more convenient and easier.
【Easy To Install】The package comes with 2 pieces of 3M glue. Just tear off the protect paper and stick it on the back of door sensor. Then stick door sensor on the proper position. No need complicated tools and steps to install the window sensor. Note: The notch side should towards each other.
$36.99